Material Managing Electrical power UNIT two
This power unit functions electrical power up gravity down circuit. Activate the start off solenoid to start out the motor to lift the machine. The lowing movement is activated by the solenoid valve with all the decreasing pace managed through the pressure compensated movement manage valve. Merchandise of this series might be extensively utilized in the industry of logistic gadgets including fork lift, mini lift table, etc.
1. The duty of this energy unit is S3,i.e.,thirty seconds on and 270 senconds off.
two. Clean each of the hydraulic elements concerned prior to mounting the power unit.
three. Viscosity in the hydraulic oil shoud be 15~46 cst,which need to also be clean and no cost of impurities, N46 hydraulic oil is advised .
four. Oil transforming is needed right after the first 100 operation hours,afterwards after just about every 3000 hours.
five. The power unit must be mounted horizontally.
Material Dealing with Electrical power UNIT 1
This energy unit is built to the fork lift industry, consisting of remarkably productive gear pump, DC motor, manual increase and lower valve, tank, ect. The up and down movement are managed through the lever of your manual release valve, which can be equipped with an electric switch to activate the motor. The lowing speed is managed through the pressure compensated flow control valve.
one. The duty of this electrical power unit is S3, i.e. thirty seconds on and 270 senconds off.
two. Clean each of the hydraulic elements concerned ahead of installation of the energy unit.
three. Viscosity of your hydraulic oil shoud be 15~46 cst, which really should also be clean and absolutely free of impurities, N46 hydraulic oil is advisable .
4. Oil modifying is required after the original one hundred operation hrs, afterwards after every single 3000 hrs.
5. The electrical power unit proven is created to be mounted horizontally.