DK Detachable Teeth Sprockets

Any damage on the teeth surfaces of the sprocket diminishes the lifestyle of the conveyor chain.
With typical sprockets, considerably worn sprocket teeth had been repaired by teeth padding or the entire sprocket was replaced. In both situation, repair was pricey and with teeth padding, accuracy was impaired. We designed new sprockets with detachable teeth for independent replacement. This sprocket is extremely rated by our customers for that dramatic cost savings in price and time.
Structure
The teeth can be replaced by two solutions: individual tooth replacement or sectional teeth substitute.
The bolts and nuts used for mounting the teeth on for the sprocket are spot-welded to avoid loosening.
The respective structures are illustrated about the suitable.
The over photo along with the prime suitable illustration demonstrate a sprocket for personal tooth replacement. Because the joint face amongst the replaced teeth as well as sprocket is formed in the exclusive arc, the bonding accuracy is high as well as the sprocket strength is enhanced. Moreover, since the load acting on the mounting bolts is decreased, there may be less likelihood of loosening. This sprocket development is patented.
There are actually two kinds of hubs: cast steel and welded sheet steel hubs. Cast steel hubs are utilized for huge sprockets receiving hefty loads and welded sheet steel hubs for other applications.