ep

January 20, 2021

DC MOTOR PUMP GROUP one
General Description
Consisting of a heavy duty DC motor and the CB1S gear pump, this pump motor group is definitely an suitable hydraulic electrical power unit for mobile hydraulic equipments, such as car carriers, mobile aerial lifts, and backup systems.
DC MOTOR PUMP GROUP two
General Description
This motor pump consists of 4.5″ DC motor, a CBSR gear pump with built-in relief valve and check out valve.
DC MOTOR PUMP GROUP 3
Common Description
This motor pump consists of a four.5″ DC motor as well as a CBSR gear pump which has a normal power up/gravity down circuit which has a relief valve, a verify valve and a solenoid release valve.
Special Notes
one. This power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean each of the hydraulic components concerned in advance of mounting the energy unit.
three. Viscosity on the hydraulic oil shoud be 15~68 cst, which need to also be clean and absolutely free of impurities. N46 hydraulic oil is recommended.
4. The electrical power unit must be mounted horizontally.
five. The relief valve pressure is preset about 25% higher compared to the working stress.
six. Flow management valve for lowing speed adjustment is obtainable unpon request.