China supplier DN 65 Grooved Flexible Coupling with FM UL Certificate in Fire System Project

Product Description

Product Description

A grooved reducing flex joint is a mechanical pipe joint that allows pipes of different diameters to be joined while providing a degree of flexibility. These couplings consist of 2 grooved end fittings and a flexible gasket or sleeve that is installed on the pipe. Grooves on the pipe ends provide a strong mechanical connection when the fitting is tightened.

Application:
Grooved reducing flexible joints are commonly used in a variety of piping systems such as:

CHINAMFG (Heating, Ventilation, and Air Conditioning): Used to connect ducts in CHINAMFG systems where flexibility may be required due to thermal expansion and contraction.

Fire Protection Systems: Typically used in fire sprinkler systems to connect pipes of different sizes while allowing for movement due to temperature changes.

Water and Wastewater Systems: For water and drainage systems where flexibility and ease of installation are important.

Industrial Piping: Used in industrial applications where grooved coupling systems are favored for their simplicity and speed of installation.

Material standards for groove couplings:
Material standards for grooved couplings are often set by industry organizations and standards bodies. The material used for grooved joints is usually ductile iron, but stainless steel and other materials can also be used, depending on the application and specific requirements.

Standards governing grooved couplings include:

ANSI/AWWA C606 – Groove and Shoulder Joints for Ductile Iron Pressure Piping and Fittings: This standard covers groove and shoulder joints for ductile iron pressure piping, fittings, and other components.

ASTM A536 – Standard Specification for Ductile Iron Castings: This standard covers compositional, mechanical, and other requirements for ductile iron castings.

NFPA 13 – Standard for Installation of Sprinkler Systems: This standard, published by the National Fire Protection Association, provides guidance for the installation of sprinkler systems, including the use of grooved joints.

Nominal Size
mm/in
Pipe O.D

mm

Working
Pressure
PSI/Mpa
Dimensions      mm Bolt Size Certificate
L H W NO.-Size

mm

65X50/212X2 73X60 300/2.07 143 102 45 M10X65 FM  UL
65X50/30DX2 76X60 300/2.07 143 102 45 M10X65 FM  UL
80X50/3X2 89X60 300/2.07 163 118 47 M12X70 FMUL
80X65/3X212 89X73 300/2.07 163 118 47 M12X70 FMUL
100X50/4X2 114X60 300/2.07 200 150 50 M12X70 FMUL
100X65/4X212 114X73 300/2.07 200 150 50 M12X70 FM  UL
100X65/4X3OD 114X76 300/2.07 200 150 50 M12X70 FM  UL
100X80/4X3 114X89 300/2.07 200 150 50 M12X70 FMUL
150X100/612ODX4 165X114 300/2.07 270 200 51 M16X85 FM  UL
150X80/6X3 168X89 300/2.07 270 200 51 M16X85 FMUL
150X100/6X4 168X114 300/2.07 270 200 51 M16X85 FM  UL
200X150/8X612OD 219X165 300/2.07 335 260 63 M20X110 FM  UL
200X150/8X6 219X168 300/2.07 335 260 63 M20X110 FMUL

Quality Control:

what is the rigid and flexible Coupling difference?

Coupling play an important role in connecting pipe segments to prevent leaks caused by damaged or damaged joints while maintaining the integrity of the pipe in the process. It is a very suitable fitting for the pipe and pipe industry. Most pipe installations require multiple pipe sections to be joined together or cut to facilitate changing direction and traversing obstacles. A fitting is a concise pipe or pipe. It has a socket or female thread at 1 or both ends. Fitting allows 2 pipes or pipes of the same or different sizes to be joined together to form a long pipe.

Flexible coupling
Flexible couplings are designed to transmit torque while allowing some radial, axial and angular misalignment. They can accommodate angular misalignment of up to a few degrees and some parallel misalignment. Elastic couplings allow for some angular misalignment and axial movement, meaning they can be used to create smooth bends and absorb thermal expansion contractions in piping systems. In some cases, the use of elastic couplings can even exclude conventional expansion joints, loops and other expansion devices from the system entirely. When assembling a stretch rubber gasket, the gasket is slightly smaller than the pipe diameter at both pipe ends and produces the first seal. The 2 halves of the coupling are then placed around the washers that adapt to them. The coupling halves are bolted together to further improve the seal.

FAQ

1. What is the minimum quantity of the order? 
Answer: The purchase volume of mixed products is 4 tons

2. How long is the delivery time of the order?
Answer: The delivery time for general orders is about 30 days. If the order is urgent and we have stock, around 7 days.

3. What payment methods do you accept?
Answer: We accept payment terms such as TT, L/C, DP, Western Union, Paypal, etc.

4. Where is your departure port of shipment? Is it possible to deliver to the designated warehouse?
Answer: The port of departure of our goods is generally ZheJiang Port or HangZhou Port. We can transport the goods to designated warehouses, such as HangZhou, HangZhou, etc.

5. What certificates do your products have?
Answer: Our products have FM/UL certificates, and we cooperate with third-party quality inspection certification before the factory, such as SGS,TUV

6.What are the series of your products?
Answer: Our products are divided into heavy series, medium series and light series according to different markets and standards. In order to buy more competitive products for you, please communicate your purchasing needs with the salesperson.

7. Do product packaging cartons and labels support customization?
Answer: Packaging cartons and labels can be customized according to customer requirements.

8.Does the purchased product support customization?
Answer: The product supports customization, but there are purchase quantity requirements and mold costs. For details, please consult the salesperson.

9.What are the packaging methods of the product?
Answer: The packaging of the product includes carton packaging, pallet packaging, wooden box packaging, and woven bag packaging.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

flexible coupling

Can flexible couplings accommodate variable operating conditions and loads?

Yes, flexible couplings are designed to accommodate variable operating conditions and loads in mechanical systems. They offer several features that allow them to adapt to changing conditions and handle different loads effectively. Below are the reasons why flexible couplings are well-suited for such applications:

Misalignment Compensation: Flexible couplings can handle misalignment between shafts, including angular, parallel, and axial misalignment. This capability allows them to accommodate slight shifts in shaft positions that may occur due to thermal expansion, vibration, or other factors, ensuring smooth operation even in changing conditions.

Shock and Vibration Absorption: Flexible couplings can dampen shocks and vibrations that result from sudden changes in load or operating conditions. The flexible element in the coupling acts as a buffer, absorbing and reducing the impact of sudden loads or transient forces, protecting connected equipment and increasing system reliability.

Variable Load Capacity: Flexible couplings come in various designs and materials, each with its load capacity range. Manufacturers provide different coupling models with varying load capacities to accommodate different applications. Properly selecting the right coupling for the specific load conditions ensures reliable power transmission even under varying loads.

Compensation for Thermal Expansion: Temperature changes can cause thermal expansion in mechanical systems, leading to shaft misalignment. Flexible couplings can handle the resulting misalignment, compensating for thermal expansion and ensuring continuous and smooth power transmission.

Torsional Stiffness: Flexible couplings are designed with a balance between flexibility and torsional stiffness. This property allows them to adapt to variable loads while still providing the necessary rigidity for efficient power transmission.

Durable Materials and Designs: Manufacturers produce flexible couplings from durable materials like stainless steel, aluminum, or engineered elastomers. These materials ensure that the couplings can withstand varying operating conditions, including temperature fluctuations, harsh environments, and high loads.

Dynamic Behavior: Flexible couplings have a dynamic behavior that enables them to operate smoothly and efficiently under changing loads and speeds. They can handle variations in rotational speed and torque while maintaining consistent performance.

Application Flexibility: Flexible couplings find applications in a wide range of industries, from automotive and aerospace to industrial and marine. Their versatility allows them to accommodate variable operating conditions and loads in different systems.

Summary: Flexible couplings are well-suited for applications with variable operating conditions and loads. Their ability to compensate for misalignment, absorb shocks and vibrations, and handle thermal expansion make them reliable components in mechanical systems. The availability of various coupling designs and materials allows for the selection of the appropriate coupling based on the specific application requirements, ensuring optimal performance and longevity in variable conditions.

flexible coupling

Can flexible couplings be used in precision manufacturing equipment, such as CNC machines?

Yes, flexible couplings can be used in precision manufacturing equipment, including CNC (Computer Numerical Control) machines. CNC machines require high accuracy and precision during operation to produce complex and intricate parts. Flexible couplings play a vital role in such equipment by providing various benefits that enhance their performance and reliability.

  • Compensation for Misalignment: CNC machines often have multiple moving parts and axes that need precise alignment. Flexible couplings can accommodate small misalignments between these components, ensuring smooth and reliable power transmission without inducing additional stress or strain on the system.
  • Vibration Damping: Precision manufacturing requires minimizing vibrations that could affect the quality of the finished product. Flexible couplings with damping properties can absorb and dissipate vibrations, resulting in better surface finishes and accuracy of the machined parts.
  • Torsional Flexibility: CNC machines may experience torque fluctuations during acceleration, deceleration, or tool changes. Flexible couplings with torsional flexibility can handle these variations and prevent torsional vibrations from affecting the machining process.
  • Backlash Compensation: Some types of flexible couplings, such as beam couplings, offer minimal or near-zero backlash. This characteristic is essential in CNC machines, as it helps maintain positional accuracy during direction changes and reversals.
  • High Torque Transmission: CNC machines may require high torque transmission capabilities, especially in heavy-duty cutting or milling operations. Flexible couplings can handle substantial torque loads while still providing flexibility to address misalignments.
  • Reduced Maintenance: With the ability to absorb shocks and compensate for misalignment, flexible couplings can extend the life of other mechanical components in the CNC machine, reducing overall maintenance requirements and downtime.

It’s important to select the appropriate type and size of flexible coupling based on the specific requirements of the CNC machine, including torque, speed, misalignment, and environmental conditions. Regular maintenance and inspection of the flexible couplings will ensure optimal performance and contribute to the overall precision and efficiency of the CNC machine.

flexible coupling

What are the factors to consider when choosing a flexible coupling for a specific system?

Choosing the right flexible coupling for a specific system requires careful consideration of several factors. The following are the key factors that should be taken into account:

  • 1. Misalignment Requirements: Assess the type and magnitude of misalignment expected in the system. Different couplings are designed to handle specific types of misalignment, such as angular, parallel, or axial misalignment. Choose a coupling that can accommodate the expected misalignment to prevent premature wear and failure.
  • 2. Torque Capacity: Determine the required torque capacity of the coupling to ensure it can transmit the necessary power between the shafts. Consider both the continuous and peak torque loads that the system may experience.
  • 3. Operating Speed: Take into account the rotational speed of the system. High-speed applications may require couplings that can handle the additional centrifugal forces and balance requirements.
  • 4. Temperature Range: Consider the operating temperature range of the system. Select a coupling material that can withstand the temperatures encountered without losing its mechanical properties.
  • 5. Environment and Conditions: Evaluate the environmental conditions where the coupling will be used, such as exposure to moisture, chemicals, dust, or corrosive substances. Choose a coupling material that is compatible with the operating environment.
  • 6. Space Constraints: Assess the available space for the coupling installation. Some couplings have compact designs suitable for applications with limited space.
  • 7. Installation and Maintenance: Consider the ease of installation and maintenance. Some couplings may require special tools or disassembly for maintenance, while others offer quick and simple installation.
  • 8. Torsional Stiffness: Evaluate the torsional stiffness of the coupling. A balance between flexibility and stiffness is essential to prevent excessive torsional vibrations while accommodating misalignment.
  • 9. Shock and Vibration Damping: For applications with high shock loads or vibration, select a coupling with excellent damping characteristics to protect the system from excessive forces.
  • 10. Cost and Budget: Compare the cost of the coupling with the overall budget for the system. Consider the long-term cost implications, including maintenance and replacement expenses.

Ultimately, the choice of a flexible coupling should align with the specific requirements and operating conditions of the system. Consulting with coupling manufacturers or engineering experts can provide valuable insights to ensure the optimal selection of a coupling that enhances system performance, reliability, and efficiency.

China supplier DN 65 Grooved Flexible Coupling with FM UL Certificate in Fire System Project  China supplier DN 65 Grooved Flexible Coupling with FM UL Certificate in Fire System Project
editor by CX 2024-05-16